View Full Version : Grease Gun Extractor
Fing_57
11-10-2007, 06:40 PM
it's Oil time :D
Grease gun was converted to Oil :rolleyes:
10 big Butane cans and 20oz of weed and some leaf
I ground it all up and made 5 extractions
will add more later
shits kicked in
gorilla
11-10-2007, 09:31 PM
careful fing. :o sounds bad ass.
can't wait to see but don't get hurt. :cool:
Great idea man.
Got a question...
what did you do to the bottom of the grease gun part. I seen the pic, but the camera flash hit the bottom part and I couldn't quite tell what you did there.
Look at that frosty jug...that butane sure does get cold. :D
Fing_57
11-11-2007, 09:28 AM
screened cap was the pump at 1 time
top has a butane fitting epoxied in
to make one the easy way ......
2" to 2.5" pipe 12" long
2 pipe caps same size as the pipe
1 fine screen (steel, brass or stainless)
drill a cap to match the butane cans outlet tube .... 1/8" drill bit (inlet end)
the other cap can be drilled or milled out
or hose clamp the screen over end (outlet end)
Thanks man, the screen fitting is what I couldn't see.
I gotta extra grease gun, might have to give this a shot.
reubeni
11-12-2007, 03:04 PM
Just a word of caution!!! there is an issue with using metal components; at all cost metal should be avoided due to thermal constraints ,static electricity and the chance of creating a metal to metal spark :eek:, much safer to use plastic throughout.
Check my tube in the pic "tis the bomb":cool:
peakguy
11-12-2007, 04:03 PM
Fing, you just have too much time on yer hands bro! Be careful with that butane, and good luck.
Just a word of caution!!! there is an issue with using metal components; at all cost metal should be avoided due to thermal constraints ,static electricity and the chance of creating a metal to metal spark :eek:, much safer to use plastic throughout.
Check my tube in the pic "tis the bomb":cool:
I will have to aurgue that PVC can generate a ton of static as well. (take a sock and rub it along the PVC tube you'll see. ;)
I think caution either way is a must. Triple refined butane is a must as well.Outdoors, no smoking or open flames, ect.
No methyl marcaptan in my butane thank you.
Great design on the extractors guys. :cool:
Stainless steel being the best. IMO.
reubeni
11-12-2007, 05:24 PM
I will have to aurgue that PVC can generate a ton of static as well. (take a sock and rub it along the PVC tube you'll see. ;)
I think caution either way is a must. Triple refined butane is a must as well.Outdoors, no smoking or open flames, ect.
No methyl marcaptan in my butane thank you.
Great design on the extractors guys. :cool:
Stainless steel being the best. IMO.
I think you will find across most the growing forums the general consensus is towards PVC as a safer material; as you would have to give it a good wan* to gain a spark; as for metal if you drop it spark, if there is static build on your clothes a spark may arc.
The problem with PVC is its purity it can leach chems from a reaction to the butane , but if you are worried about all the problems then just smoke the weed:D
Age old aurgument.
Stainless over PVC and vice versa. ;)
Think both is dangerous, but the end product is what matters ;)
just be careful guys :)
Fing_57
11-12-2007, 06:11 PM
Pyrex would be the safest in my eyes
not gonna be using PVC here
a dew covered pipe wrapped in a towel resting on glass on a wood back porch .... was very safe
if you're worried about sparks that bad ...... ground it
thats a friends toy
his other one is all Stainless Steel
Fing_57
11-18-2007, 11:16 AM
this is most of it
it's very hard hitting to the head :erm: :goofy:
http://www.homegrownbud.com/forums/attachment.php?attachmentid=12399&stc=1&d=1195409774
majestyk5
11-18-2007, 06:52 PM
mmmmmm
oil looks great :crazy::eat::drool:
nice coin :)
IN
Fing_57
11-18-2007, 07:15 PM
:( do I have too?
lol I B eye'n
:pass:
majestyk5
11-18-2007, 08:07 PM
great pic fing
Nice oil...cool coin.:D
I used to collect too.
Still got a few old large cents.
Sticky_Budz
11-20-2007, 07:29 AM
Hey fing love the oil man never tried it like that how do you smoke it in a bowl?
Hey i see that coin there are you into collecting them have a few maybe i will take some pics and you can let me know if they are worth saving thanks