How To Make a Gravity Bong

[dredank]

Hey everyone, I dont know how many of you know how to make one of these, but here it is.2thumbs :peace:

You'll need big jug, 2 Liter will work, big milk jug like this is better, a knife, and a bowl piece.
http://www.homegrownbud.com/forums/attachment.php?attachmentid=825&stc=1&d=1134792803

Then cut off the bottom of the jug
http://www.homegrownbud.com/forums/attachment.php?attachmentid=826&stc=1&d=1134792803


Then you will need to make a hole in the top to fit the bowl downstem. Heat up the tip of the knife and lay the top down on a surface. cut out a small hole about the size of your bowls downstem, smaller is better. If you used a 2 Liter the cap is harder and you have to kind of carve the hole out.
http://www.homegrownbud.com/forums/attachment.php?attachmentid=827&stc=1&d=1134792803
http://www.homegrownbud.com/forums/attachment.php?attachmentid=828&stc=1&d=1134792803

Now heat up the bowls downstem and push it thru the cap
http://www.homegrownbud.com/forums/attachment.php?attachmentid=829&stc=1&d=1134792803


Now screw the cap on, and badow, there you go2thumbs
http://www.homegrownbud.com/forums/attachment.php?attachmentid=830&stc=1&d=1134792803

Now to rip it

Unscrew the top and place the jug in water filled reservoir like a sink or bucket, jacuzzis also work great2thumbs

Now load up the bowl and screw it on. Then light the bowl and start pulling up on the jug, the suction of the water draining out the bottom will keep the bowl cherried and milk up the chamber:D .
http://www.homegrownbud.com/forums/attachment.php?attachmentid=831&stc=1&d=1134792803

Pull all the way untill there is about half an inch to an inch of water left on the inside of the container, the keep it steady and unscrew the bowl cap.

Put your mouthpiece on the top and push down on the jug while inhaling the smoke. Pushing the jug will push the smoke into your lungs;)


Repeat:peace:

[dredank]

right on lets get faded then:smoke1: :bong: :peace:

[peakguy]

dude, were you in my kitchen when you filmed that? I will take some pics and post them tomorrow, can't believe you were here and did not leave any of that vast collection of bud you keep.
peace

[CB]

just cleaned it up a bit since we got the pic stuff sorted

thx for share'n bro 2thumbs

[midwestbluntman]

my first experiance with a DIY gravity bong was many moons ago,It was at a beach party back in galveston.The bucket we used to hold the water was an ice chest that the ice was mostly melted.The Rips you get with one of these is just unbeliveable,I think the ice cold water made it hit easier also.Excellent tool dred,thanks for sharing.

[dredank]

Yeah, gladly, happy you guys like it.2thumbs They do rip the hell out of you, epessically with some kief, hash or oil on top of the bowl:D
:peace:

[AzGrowa]

Hey dre nice pictorial.
The only thing I do different is I use a 2 liter (1/2 gallon) jug.
Instead of just whackin' the bottom comletely off, I cut the bottom in 4 triangles and leave the plastic attached at one or two points. It slows the water down a little bit which results in a better draw and denser smoke.
On the cap, I just take the stem and heat it up and then just press it in the cap to form the hole. Makes a better seal and less air passes the stem.
wanna get together and see how the improvements work?

[dredank]

Sounds good, I've used 2 liters, they're great2thumbs the gallon jug sue packs a punch though:D , If you really wanna get ballsy you can make one out of those big 5 gallon water jugs and hit it out of a big garbage can:eek:

I really like that idea of only cutting out holes of the bottom instead of brutaly chopping the whole bottom off;)
Im down to sesh the improved ones when you are, say the word my man:cool:
:peace: